Xerox DocuColor 12 Color Manual

Also see for DOCUCOLOR 12: Materials usage guide System administration guide Specifications Reference guide Quick start guide

Contents

Xerox DocuColor 12 Color Manual Manual pdf 109 page image

AA-11 Color Measurement InstrumentsCalibrating the DTP32You will need the black-and-white X-Rite Auto-Cal Strip included with thedensitometer. Calibrating the densitometer does not require ColorWise Pro Tools.T O CALIBRATE THE X-R ITE DTP321. Connect the densitometer to the computer and supply power (see page A-8).2. From the Main Menu on the X-Rite DTP32 display, press the p1 key once to reach p2.3. Press the cal key.Calibrating motor speed is displayed, followed by the words INSERT CAL STRIP.4. Insert the arrow end of the X-Rite Auto-Cal Strip into the 35mm slot on the front ofthe X-Rite DTP32 until it stops or the roller starts pulling the strip.Reading appears momentarily, followed by the density values and CALIBRATION OK.The densitometer automatically returns to the MAIN MENU.If UNRECOGNIZABLE STRIP appears, repeat the process or try cleaning the strip (see theX-Rite DTP32 Operating Manual).5. Start ColorWise Pro Tools and calibrate the Fiery (see the following section).Recalibrate the DTP32 at least once per month. For critical color, calibrate thedensitometer every time you calibrate the Fiery. The DTP32 may also warnperiodically that it requires calibration.