Xerox DocuColor 12 User Manual

Also see for DOCUCOLOR 12: Materials usage guide System administration guide Specifications Reference guide Quick start guide

Contents

Xerox DocuColor 12 User Manual Manual pdf 95 page image

DOCUCOLOR 12 USER GUIDE 4–21 BASIC COPYING1234567Auto Tray Switching - Tools ModeAuto Tray Switching is enabled in the Tools modeonly for Paper Trays 1, 2, 3 and 4. Tray 5 can notbe enabled for Auto Tray Switching.The Auto Tray Switching feature enables thecopier/printer to switch automatically to anothertray when a tray runs out of paper. The trays mustbe loaded with the same size paper in the sameorientation (long edge feed or short edge feed).Also, Auto Tray Switching must be enabled withthe same paper type assigned to two or moretrays.Auto Tray Switching is active only if the Autopaper supply button is selected.The default for Auto Tray Switching is ON withPaper Trays 1, 2, 3, and 4 enabled. To use AutoTray Switching with the default settings, load thetrays you want to use with the same size paper inthe same orientation.For example, if you load trays 2 and 3 with thesame size paper in the same orientation, selectthe Tray 2 Paper Supply button on the BasicCopying tab of the Touch Screen. The copier/printer draws paper from Tray 2 until it is depleted,then switches automatically to Tray 3.For further information on this feature, see theSystem Administration Guide, Tools section.