Xerox DocuPrint 115 System Manual

Also see for DocuPrint 115: System guide Getting started Software guide Planning guide Operation guide

Contents

Xerox DocuPrint 115 System Manual Manual pdf 96 page image

Hints and Tips System Guide10-6 Common ControllerThe DC 2045/2060/6060 print engine will also perform IQadjustments if a difficult job is being processed and RIP fallsbehind the print output. If this occurs, the print engine will cycledown for a few seconds while the RIP catches up and then it willperform an IQ adjustment which will take anywhere from 5-95seconds. During the IQ adjustment, the printer will not printanything. However, the RIP will continue and be slightly ahead.As soon as the printer finishes the IQ adjustment it will print all ofthe RIPped pages and catch up with the printer.Job Printing HintsThe DC 6060 print engine cycles down on certain operationssuch as on tray/bank switches or between jobs. Each cycle maytake 10-40 seconds to complete before the print engine is readyto print again. To avoid unnecessary print engine cycling, youcan perform the following:• Disable finishing, slip-sheets and offset stacking.• Disable banner sheets when making multiple copies of a job.• Avoid media tray switches by constructing the job to use onlya single size, color, weight paper and by ensuring beforerunning a job that the currently active tray has enough medialoaded to print the entire job.Skipped PitchesTo stop the cycle of skipped pitches and cycle the print enginedown, perform one of the following to improve the overall jobperformance:1. Process the job in N-1 order rather than 1-N order. This willforce the job to be completely ripped before the print engineis started up. When the print engine starts it will consumepages at 60 ppm until all pages are printed.