SETTING THE SYSTEM CONFIGURATIONXEROX DOCUPRINT 4850/4890 IPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM 4-353. From the Modify Margin Settings window, select one or moreIPDS trays.Note: The current margin values for the first IPDS tray selecteddisplays.Figure 4-23. Modify Margin Settings window4. Change the margins to the desired values.5. Click Apply.6. Repeat steps 3 through 4 until all trays contain the desiredvalues.7. Click Quit.8. From the Input Configuration window, click Apply and Save.9. From the Input Configuration window, click Quit.Setting up the Media LibraryThe Media Library is a virtual representation of the stocks (media)that you have available for loading in your IPS feeder trays. To createan input tray configuration, you copy (by dragging and dropping)media icons from this Library to the tray cells on the InputConfiguration window. When you place icons for the same stock inan IPDS tray cell and a printer tray cell, the IPDS and printer trays areautomatically mapped together.When your IPS is first installed, your Xerox representative assistsyou in placing media icons in the Media Library for the stocks that youneed for what will be your Default input configuration. If you will beusing stocks in addition to those already in your Media Library, youmust add them. You can create icons representing standard sizes,weights, form types (3-hole, etc.), and colors of stocks. In addition,you can create customized icons for non-standard media.
