XEROX DOCUPRINT 96/4635/180 IPS SYSTEM OVERVIEW GUIDE A-1A. APaper and other suppliesThis appendix provides information and specifications for the mediayou use with your Xerox DocuPrint 96, 4635, or 180 printer.Instructions for ordering supplies are also provided.Consumable supplies (those that are depleted during operation ofthe system), such as paper, dry ink, developer, fuser agent, etc.,must be ordered for your printer. It is important that an adequatesupply of these items be on hand for installation, and that your supplybe maintained afterwards.Paper and other throughput stocksThe success of any print run is greatly dependent on the properselection, care, and handling of the stock used.Selecting paperYou need to select your paper carefully. If you do not use the properpaper, you increase the probability of paper jams and misfeeds. Thestocks you use must meet the specifications set forth by Xerox foroperability in the printer. For additional information about paperspecifications, refer to Helpful Facts about Paper, delivered with yourprinter.Acceptable paper stocks and sizes Your 96, 4635 or 180 printer accepts the following standard size cut-sheet papers:• 7 by 10 inches / 178 by 254 mm (with 7-inch kit option)• B5: 7.17 by 10.12 inches / 182 by 257 mm (with 7-inch option)• US Letter: 8.5 by 11 inches / 216 by 279 mm• US Legal: 8.5 by 14 inches / 216 by 356 mm• A4: 8.27 by 11.69 inches / 210 by 297 mm• B4 (European): 9.84 by 13.89 inches / 250 by 353 mm• JIS B4 (Japanese): 10.12 by 14.33 inches / 257 by 364 mm• US Ledger/US Tabloid: 11 by 17 inches / 279 by 432 mm• A3: 11.69 by 16.54 inches / 297 by 420 mm.Recommended weight and grade: Use a good quality, xerographic-grade paper. For best results, usepaper that is 20-pound or 80 gsm (grams per square meter) bond,xerographic grade. Xerox 4024 Dual Purpose Paper provides optimalperformance in the printer. Refer to the consumable supplies tablelater in this appendix.