Xerox DocuPrint 96 Installation Planning Manual

Also see for DocuPrint 96: Quick reference card Quick reference card User guide Installation planning guide Reference guide

Contents

Xerox DocuPrint 96 Installation Planning Manual Manual pdf 46 page image

PREINSTALLATION3-16 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS INSTALLATION PLANNING GUIDEEnvironmental/electrical requirementsYour DocuPrint 96/DocuPrint 96MX LPS has importantenvironmental and electrical requirements that must beaccommodated. These requirements are summarized in the tablebelow. For further details on electrical requirements, refer to thefollowing voltage charts and wiring diagrams.Table 3-6. DocuPrint 96/DocuPrint 96MX Environmental andelectrical requirementsEnvironmental requirementsOperating temperature Recommended:Minimum:Maximum:72° F ± 4° F/22° C ± 2° C60° F/15.5° C80° F/29.5° CHumidity Recommended: 4Minimum:Maximum:45% ± 10%15%85%Altitude Normal:Maximum:Up to 6,000 feet/1830 m above sea level9,000 feet/2743 m above sea levelHeat dissipationSystem controller Operating:Standby:4,354 Btu per hour2,485 Btu per hourPeripheral cabinet (fully configured) Operating:Standby:3,195 Btu per hour1,775 Btu per hourPrinter Operating:Standby:28,140 Btu per hour4,454 Btu per hourSystem controller U.S. and Canada, 60Hz:International, 50 Hz:208/240 VAC (1 phase) or 208/220 VAC(2 phase)15 amp serviceNEMA 6-15R or ANSI C73, 20RKVA 1.1 (operating)200/240 VAC +/-10%15 amp service;Power connector per local codes