74 4 Setting on the Control PanelAdjust BTR Specifies the value of the reference voltage for the transfer roller. You can specify thevalue between -3 to 3 for each paper type.• [Plain Paper] (default: [0])• [Recycled Paper] (default: [0])• [Bond Paper] (default: [0])• [Transparency] (default: [0])• [Heavyweight 1] (default: [0])• [Heavyweight 2] (default: [0])• [Labels] (default: [0])• [Coated 1] (default: [0])• [Coated 2] (default: [0])• [Coated 3] (default: [0])• [Envelope] (default: [0])Adjust Fuser Specifies the fuser temperature. You can specify the value between -2 to 2 for eachpaper type.• [Plain Paper] (default: [0])• [Recycled Paper] (default: [0])• [Bond Paper] (default: [0])• [Transparency] (default: [0])• [Heavyweight 1] (default: [0])• [Heavyweight 2] (default: [0])• [Labels] (default: [0])• [Coated 1] (default: [0])• [Coated 2] (default: [0])• [Coated 3] (default: [0])• [Envelope] (default: [0])Auto Adjust Regi Adjust the color registration automatically. Selecting [On] adjusts the color registrationautomatically. The default is [On].Adjust ColorRegi Correct the color registration manually.For details, refer to the Quick Reference Guide "1. Adjusting Color Registration".• [Auto Adjust]Correct the color registration.• [Color Regi Chart]Prints the correction chart.• [Enter Adjustment]Enter the number to correct the registration.Adjust Altitude Sets the elevation of the location where the printer is being used.Print Meter Initializes the total report.Initialize NVM Initializes the settings stored in the NVM except for the network settings. The NVM is anonvolatile memory that stores the printer settings even after the power is turned off.After executing this function and restarting the printer, all the menu parameters arereset to their default values.Note• You cannot execute this menu during printing.• You need to restart the printer to activate this setting. After making the setting, turn offthe printer and then turn it on again.Storage Disk Clears the RAM disk (optional). Running this menu deletes all of the data in the RAMDisk.Note• This menu is available when the optional memory is installed.Item Description
