178 7 MaintenanceChecking the Printer Status via E-mailFollow these guidelines when sending an e-mail to the printer.• Use the e-mail application on your computer and enter the printer's e-mail address in the"To:" field.• The subject can be whatever you like.• Enter the following commands observing the rules described below.Note• The method of sending e-mails varies depending on the application being used. Consult thedocumentation for your e-mail application. Supported Commands Command Entry RulesFollow these guidelines when entering commands on e-mails.• Commands are not case sensitive.• If [Password for Read-Only Data] is set, start your e-mail with "#Password".• Prefix each command with "#". Command that does not start with "#" will be ignored.• Place only one command per line and separate each command or parameter with a spaceor a tab.• When the same command is entered more than one time in one e-mail, only the first onewill be valid and the rest will be ignored. Example1. If you want to obtain the printer's status when [Password for Read-Only Data] is notset, enter:2. If you want to obtain the printer's status and network setting information when[Password for Read-Only Data] is set to "ronly", enter:Command Parameter Description#Password Password When [Password for Read-Only Data] is set, make sureto start your e-mail with this command. When thepassword is not set, you do not need to enter thiscommand.#NetworkInfo - Specify this command when you want to obtain thenetwork setting information.#Status - Specify this command when you want to obtain theprinter's status.#Status#Password ronly#Status#NetworkInfo
