Xerox DocuPrint C621 Setup Manual

Also see for DocuPrint C621: User guide Setup guide

Contents

xvDo not unplug or replug the machine while it is on. Unplugging a live connector can deform the plugand cause fire.When unplugging the machine, grasp the plug instead of the cord. Forcibly pulling on a cord candamage it and cause fire or electric shocks.Be sure to switch off and unplug the machine before accessing the interior of the machine forcleaning, maintenance, or fault clearance. Access to a live machine's interior can cause electricshocks.Once a month, unplug the machine and check the power cord for the following:• The power cord is plugged firmly into a receptacle• The plug is not excessively heated, rusted, or bent• The plug and receptacle are free of dust• The cord is not cracked or frayedIf you notice any unusual conidtions, contact your Xerox Customer Support Centre.When the machine is not used over an extended period of time, switch it off and unplug it. If anunused machine is left connected to a power source for a long period, degraded insulation cancause electric shocks, current leakages, or fire.Switch off the machine before connecting the interface cable and any optional product. Connectingthe cable or optional product with a live machine can cause electric shocks.• Reception interferenceWhen installed at a certain location, the machine may cause interference with radio and televisionreception. If you notice flickering, or distorted images or noises on your audio-visual units, yourmachine may be causing radio interference. Switch it off, and if the interference disappears, themachine is the cause of radio interference. Perform the following procedures until the interferenceis corrected.• Move the machine and the TV and/or radio away from each other.• Reposition or re-orientate the machine and/or the TV and radio.• Unplug the machine, TV, and radio, and replug them into outlets that operate on differentcircuits.• Re-orientate the TV and/or radio antennas and cables until the interference stops. For anoutdoor antenna, you should ask your local electrician for support.• Use coaxial cable antennas.Other Precautions