viUsing this GuideOrganisation of this GuideThis manual consists of five chapters. A brief introduction of each chapter is providedbelow.Chapter 1 Setting up the PrinterThis chapter explains how to look for a suitable installation environment, what to check forthe bundled products, and how to check that the printer has been properly set up.Chapter 2 Connecting the Interface CablesThis chapter explains how to connect the printer to the computer (when using it as a localprinter) and how to connect the printer to a network (when using it as a network printer).Chapter 3 Network Settings (Quick Setup)This chapter describes the procedures to define the network settings so that the printer canbe used in the TCP/IP, SMB (Windows network) or AppleTalk environment.Chapter 4 Configuring the ComputerThis chapter explains how to install the necessary software to the computer so that theprinter can be used.AppendixThis section contains the following information:• Control Panel Menu (Abstract)Explains the the control panel schematically.• About the Software Pack CD-ROMExplains the folder structure of the Software Pack CD-ROM bundled with the printer.• When Using the PrinterExplains information that you can refer to after the printer is installed.• Glossary