02/20004-20 DocuPrint N2025/N2825REP 3.3, REP 3.4Initial IssueRepair-AdjustmentREP 3.3 Lower Turn Roll AssemblyParts List on PL 3.1RemovalWARNINGSwitch off the power and disconnect the Power Cord.1. Open the Top Cover and remove the Print Cartridge. Cover the cartridge to protect it fromlight.2. Remove Tray 1.3. Remove the MBF Assembly (REP 2.1).4. Remove the Retard Chute Assembly (REP 3.1).5. Remove the E-ring from the right end of the Lower Turn Roll (Figure 1).6. Remove the right bearing (Figure 1).7. Release the locking tab on the Lower Turn Roll Gear and remove the gear (Figure 1).8. Remove the left bearing (Figure 1).9. Move the Lower Turn Roll Assembly to the left until the right end is free of the assembly(Figure 1).10. Lift and remove the Lower Turn Roll Assembly.Figure 1 Lower Turn Roll AssemblyReplacement1. Reinstall the components in the reverse order.REP 3.4 Tray 1 Low Paper SensorParts List on PL 3.1RemovalWARNINGSwitch off the power and disconnect the Power Cord.1. Open the Top Cover and remove the Print Cartridge. Cover the cartridge to protect it fromlight.2. Remove Tray 1.3. Remove the MBF Assembly (REP 2.1).4. Remove the Retard Chute Assembly (REP 3.1).5. Remove Tray 1 Left Guide Assembly (REP 3.6)6. Release the locking tabs and remove the sensor from the Guide Assembly (Figure 1).Figure 1 Tray 1 Low Paper SensorReplacement1. Reinstall the components in the reverse order.
