02/20004-68 DocuPrint N2025/N2825REP 11.10, REP 11.11Initial IssueRepair-AdjustmentREP 11.10 Feed RollsParts List on PL 11.2RemovalWARNINGSwitch off the power and disconnect the Power Cord.1. Remove the printer from the 500 Sheet Feeder (REP 11.1).2. Remove the paper tray from the feeder.3. Remove the Front Cover (REP 11.2).4. Remove the Left Cover (REP 11.3).5. Remove the 500 Sheet Feed Head Assembly (REP 11.9).6. Release the Feed Solenoid.7. Rotate the Feed Rolls up.8. Press the left locking tab and slide the roll core to the left (Figure 1).9. Slide the roll core to the left (Figure 1).10. Slide the feed roll to the left and remove (Figure 1).11. If replacing the envelope feed rolls, rotate the feed roll shaft to access the locking tabs,press the locking tabs and remove the rolls (Figure 1).Figure 1 Feed RollsReplacement1. Reinstall the components in the reverse order.NOTE: Note the arrows on the side of the envelope feed rolls. The arrows indicate thedirection of rotation.REP 11.11 Feed SolenoidParts List on PL 11.2RemovalWARNINGSwitch off the power and disconnect the Power Cord.1. Remove the printer from the 500 Sheet Feeder (REP 11.1).2. Remove the paper tray from the feeder.3. Remove the Front Cover (REP 11.2).4. Remove the Left Cover (REP 11.3).5. Remove the 500 Sheet Feed Head Assembly (REP 11.9).6. Disconnect P/J135 (Figure 1).7. Remove the screw that secures the feed solenoid (Figure 1). Remove the solenoid.Figure 1 Feed SolenoidReplacement1. Reinstall the components in the reverse order.
