DocuPrint P12 Status Monitor • 956-3 General tabThe text display area shows the name of the current default printer.Below this printer name, up to five lines of status text are displayeddepending on the printer’s state and other variables.In this tab there are: Pause Printer/Resume Printer buttonThis button is only displayed if the Status Monitor can establish a bi-directional link with the printer. The button toggles between pauseand resume depending on the state of the printer. Reset Printer buttonThis button appears only if the Status Monitor can establish a bi-directional link with the printer. When displayed, clicking this buttonwill send a Reset command to the printer and all print jobs will becanceled.When the printer is unable to receive a “End of File” signal, it willremain at Reset state until the Wait Time-out value expires. In suchcases, resetting the printer can be time consuming. Printer Setup buttonClicking this button brings up the printer driver setup dialog for thecurrent default printer. The values set in this button are used as thedefault values for the driver.
