Print Media • 473-2-3 Using the Multi-sheet Bypass FeederUse the multi-sheet bypass feeder (MBF) to print transparencies, labels,envelopes or postcards in addition to making quick runs of paper typesor sizes that are not currently loaded in the paper cassette.Acceptable print media are plain paper with sizes ranging from 4x6,toLegal 14”, the largest size acceptable, and weighing between 16lb and50lb/ 60g/m 2 and 190g/m 2 .The following table summarizes the print media allowed as well as theirstacking height limit.Paper Type Stacking Height LimitLetter (Xerox 4024DP 20lb) 80 sheets or 9mm (max)*Envelope (Monroe brandCom#10)10 envelopes or 9mm (max)*Transparency (Xerox 3R2780) 40 sheets or 9mm (max)*Label (Xerox 3R4469) 40 sheets or 9mm (max)** The height is measured with the stack of sheets laid, without being touchedby hands, on a flat surface.• Always load only the print media specified in 3-1 Selecting PrintMedia to avoid paper jams and print quality problems.• Do not hit the multi-sheet bypass feeder or rest your hands on it;otherwise the feeder may be damaged or detached from the printer.• Remove any curl on postcards, envelopes, and labels before loadingthem into the multi-sheet bypass feeder.• Do not load paper into the multi-sheet bypass feeder during printerinstallation. Be sure to wait until the printer’s power is turned on and theprinter becomes ready for the first time, then load paper.
