Page 3-2 Xerox Document Centre 440/432/430/426/425/420 User GuideCopying procedureBefore making copies on the DC440/432/430/426/425/420,identify what is to be copied and the number of copies required.Use the following steps to make a copy using the DocumentCentre.NOTE: If the Auditron has been enabled on the machine, anaccount number may be required before programming cancommence. For account allocation, or further informationabout the Auditron, please contact the Key Operator.HINT: When programming a copy job on a networkconnected machine, select Job Interrupt first. The DocumentCentre will not complete any network jobs allowing the copyjob to be programmed and completed without interruption.Refer to “Job Interrupt” on page 2-25 for more information.1. Load the documentsA choice of document input areas is available. These are:- A document feeder for single or multiple documents- A document glass for single documents or boundoriginals.NOTE: A document glass cover will be fitted on the DC425cabinet configuration.Document FeederUp to 50 documents can be scanned at one time using thedocument feeder. Ensure the documents are of the same size,in good condition and all staples or paper clips removed.Quick Pathway¾ Load documents.¾ Press [Features].¾ If necessary select[Copy].¾ Select the Copyfeatures required.
