192 How to customize the MAX 200How to change the system features (continued)Additional settingIntroductionThe additional setting feature provides additional system defaultsettings, for future needs.Depending on the code entered, the MAX 200 allows you to furthercustomize your machine. If needed, service will provide you with theadditional setting code and field value.The identified additional settings codes are:• Automatic switching from roll to tray (copy mode), code 10.• Automatic switching from roll to tray (plot mode), code 11.• Trail edge starting point of stamp location, code 110.• Enable synchronize cut in auto mode, code 200.• Default cut mode for auto mode, when manual mode cutdefault is set to long copy, code 210.For detailed information about the identified codes, refer to page 169.Procedure1. Enter custom presets. If needed, refer to page 174.2. Select the system features tab.3. Use the arrow buttons to select the additional setting feature.4. Select open.The additional setting (system feature) screen is displayed.Press Custom Presets to return toPrevious screen.System features Copy features Storage/DiskManagerOpenTime & DateAuto Power OffAuto Power saveAuto Clear/ Backlight OffAttention TonePlotter SetupLoading Stamp DataAdditional setting
