32 Getting to know the MAX 200Printer control panel (continued)Printer diagramIndicatorlampFunction1 - 5 When a jam has occurred in the tray area, the respective indictor lamp is lit red.6 When a jam has occurred between RFC drawer 1 and the xerographic area, the indictorlamp is lit red.7 When a jam has occurred between RFC drawer 2 and the xerographic area, theindicator lamp is lit red.8 When a jam has occurred between the manual feed tray and the xerographic area, theindicator lamp is lit red.9 When a jam has occurred before the xerographic area, the indicator lamp is lit red.10 When a jam has occurred in the fuser area, the indicator lamp is lit red.11 When a jam has occurred at the printer media exit area for the folder or stacker, theindicator lamp is lit red.12 When a jam has occurred at the printer media exit area, for the copy output tray, theindicator lamp is lit red.The roll 1 indicator lamp is lit, when the RFC drawer recognizes the specified mediaseries.The roll 2 indicator lamp is lit, when the RFC drawer recognizes the specified mediaseries.The roll 3 indicator lamp is lit, when the RFC drawer recognizes the specified mediaseries.The roll 4 indicator lamp is lit, when the RFC drawer recognizes the specified mediaseries.The tray 5 indicator lamp is lit, when tray 5 recognizes the specified media series.When the black or red toner needs to be replaced, the toner indicator lamp is lit.Approximately 2000 copies can be made after the indicator lamp is lit.
