Xerox N24 Technical Instructions

Also see for DocuPrint N24: System administrator guide User guide User guide Quick installation Function guide

Contents

Xerox N24 Technical Instructions Manual pdf 5 page image

Step 26Using a small flat blade screwdriverrelease the long clip the locks the tonerhopper cover to the hopper on the gearsside of the hopper. (See Photo 30)Need help with a particular remanu-facturing problem?Call the Technical Resource Center from8am - 5pm PST: 800 394.9900Xerox N24/32/40 Technical Instructions 5Step 25Remove the four screws found along thetop of the toner hopper. (See Photo 29)Photo 29Step 27To release the three chips located alongthe back of the toner hopper, pressdown on the toner hopper cover justabove the clip. While applying pressureto the cover, use a small flat bladescrewdriver to pry the clip that locksthe cover in place away from thehopper. (See Photo 31)Step 28Release the clip located next to the fillplug in the same way. (See Photo 32)Step 29With all the clips released, lift the coveroff the hopper. (See Photo 33)Photo 30Photo 31Photo 32Photo 33Photo 34Step 30Using dry compressed air ora vacuum clean out the tonerhopper and the toner hoppercover.Step 31Using a Philips screwdriverremove the screw that holdsthe contact end cap to thehopper. (See Photo 34)