Xerox N24 Technical Instructions

Also see for DocuPrint N24: System administrator guide User guide User guide Quick installation Function guide

Contents

Xerox N24 Technical Instructions Manual pdf 7 page image

Step 40Reinstall the contact end cap on thetoner hopper. Using a Philips screwdriverinstall the screw that hold the end cap.(See Photo 44)Need help with a particular remanu-facturing problem?Call the Technical Resource Center from8am - 5pm PST: 800 394.9900Xerox N24/32/40 Technical Instructions 7Step 39With the seal pull tab through the sealexit port, use needle nose pliers to holdthe agitator bar in the correct positionwhile reinstalling the seal exit port plug.(See Photo 43) Pull the seal pull-tab tightso the agitator bar does not hit thepull-tab.Photo 43Step 41Push the fill plug out of the tonerhopper. (See Photo 45)Step 42Place the cover of the toner hopper ontothe hopper. Push down on the covermaking sure all five clips a securelyfastened. Install the four screws to thetop of the cover. (See Photo 46)Step 43Reinstall the doctor blade and the twoscrews that hold the blade in place.(See Photo 47)Photo 44Photo 45Photo 46Photo 47Step 44Place the mag roller bushingand the bearing onto the magroller. Reinstall the roller backinto the hopper. Slide the stabi-lizing bushing, the drive gearand the end cap back onto theend of the mag roller. Reinstallthe screw that holds the endcap onto the hopper.(See Photo 48)Step 45Fill the toner hopper with thecorrect fill load of toner.(See Photo 49) Reinstall the fillplug.Photo 48Photo 49

/ 10

Related manuals for Xerox DocuPrint N24