Xerox Nuvera Release IssuesCQ#43522 Annotation-2DescriptionWhen performing a “Copy and Save” or “Print and Save” operation with annotations turnedon, the reprint of the saved job will be unreadable.WorkaroundPerform a “Save” operation and then “Print” the saved job.CQ#44256 Configuration BackupDescriptionWhen performing a Configuration Backup, make sure you do not exceed the maximum disksize of the CD. If you do, the backup will fail without an indication as to why.WorkaroundNone.CQ#44223 PDF and HTML Files Viewed from CDDescriptionOperator needs to view PDF or HTML files on a CD.WorkaroundDo one of the following:1. To view PDF files, go to [Launch -> Applications -> Graphics -> PDF Document Viewer]and open the PDF on the CD.2. To view HTML files, go to [System -> Remote Services -> Options -> Launch WebBrowser].CQ#44186 Recognizing Indication of Successfully Proofed JobDescriptionWhen a job is successfully proofed, there appears to be no indication that it has been proofed.WorkaroundEnsure the “Proof/Review Status” column is in the visible portion of the table. This column isidentified by a computer icon in the header. If the column is at the end of the table (left side),move it to the beginning (right side). A successfully proofed job will have an icon appear in thiscolumn that looks like a green check mark over a document.Hints and Tips Guide 3-3