Phaser 6700 Printer Service Manual Xerox Internal Use Only 9-3• SSSSSS = Six digit numeric serial number based on the following table. Theserial numbers are reset only when the ending number is reached or when therevision number is rolledc = Check digit.ExamplesXerox Serial Number = AB9774072Product code for 110V printer = AB9Serial number for 6700_N or 6700_DN = 774072Xerox Serial Number = 3170057367Manufacturing location code for 220V printer = 317Serial number for 6700V_DN = 005736Check digit = 7Using the Parts ListNoteParts with part numbers are available for order. Parts without part numbersare only available with the parent assembly.• Item: The item number in the parts diagram.• Name/Description: Part nomenclature and number of parts per order.• Part Number: The part number to order that specific part.• Parts are referenced PL#.#.#; For example, PL3.1.10 means the part is item 10of Parts List 3.1.• A black triangle preceding a number followed by a parenthetical statement inthe parts diagram means the item is a parent assembly, made up of theindividual parts called out in parentheses.• The notation “with X~Y” following a part name indicates an assembly madeup of components X through Y. For example, “1 (with 2~4)” means part 1consists of part 2, part 3, and part 4.• An asterisk (*) after a part indicates the page contains a note about this part.• The notation “J1<>J2 and P2” is attached to a wire harness. It indicatesconnector Jack 1 is attached to one end of the harness and connector J2 isattached to the other end plugged into P2.• Fastener location and type are indicated using designators. Refer to “FastenerTypes” on page 8-5 for a complete list of fasteners used, and “Hardware Kit -604K56670” on page 9-102 for fasteners available in the Hardware Kit.Product Starting Serial Number Ending Serial Number6700V_DN, 220V Engine 001001 100500Designator Fastener TypeE E-ringKL K-clipST Screw, self-tappingSM Screw, sheet metalwww MK-Electronic de