Xerox Phaser 3010 User Manual

Also see for Phaser 3010: Manual Specifications Service manual Installation guide

Contents

Xerox Phaser 3010 User Manual Manual pdf 52 page image

Troubleshooting52 Phaser 3010/3040 PrinterUser GuideUsing the Printer Setting UtilityThis section includes:Adjusting the Fuser ............................................................................................................................................................. 52Adjusting the Bias Transfer Roller................................................................................................................................. 52Adjusting the Altitude ........................................................................................................................................................ 53Cleaning the Developer ..................................................................................................................................................... 53The Printer Setting Utility installs on your computer when you install the print driver. The Printer SettingUtility has three tabs that help you to monitor, maintain, and troubleshoot the printer.To use the Printer Setting Utility:1. To start the Printer Setting Utility, on your computer select Start > All Programs > XeroxOffice Printing.2. Select your printer name, then select Printer Setting Utility.3. Click one of the tabs to view Printer Settings, perform Printer Maintenance, or use Diagnosis tools.Adjusting the FuserUse Adjust Fuser for optimum print quality across a wide range of paper types. If the toner on a print issmearing or can be rubbed off the paper, increase the offset for the paper you are using. If the toner isblistered or mottled, decrease the offset for the paper you are using.To adjust the fuser:1. Launch the Printer Setting Utility and select the Printer Maintenance tab.2. Click Adjust Fuser.3. Change the offset value for the paper that you are using.4. Click Apply New Settings.Adjusting the Bias Transfer RollerUse Adjust BTR to specify the bias transfer roller voltage for printing on the selected paper type. If theprinted image is too light, increase the offset for the paper you are using. If the printed image is mottledor blotchy looking, decrease the offset for the paper you are using.To adjust the bias transfer roller:1. Launch the Printer Setting Utility and select the Printer Maintenance tab.2. Click Adjust BTR.3. Change the offset value for the paper that you are using.4. Click Apply New Settings.