Xerox Phaser 3100MFP/S User Manual

Also see for 3100MFPX - Phaser B/W Laser: User guide User manual Evaluator guide Instructions Installation instructions

Contents

Xerox Phaser 3100MFP/S User Manual Manual pdf 17 page image

Phaser 3100MFP/S- 13 -2 - Installationpaper or originals.- For environmental reasons, do not dispose of the product or expended supply wastes at household wastecollection point. Disposal can take place at our authorised dealer or at appropriate collection sites.- Our products are engineered to meet the high standards of quality and functionality, and we recommend that youonly use the expendable supplies available at an authorised dealer.Power SupplyThe power outlet should be close to the machine and should be easily accessible.Paper recommendationsLoading paper in the main paper tray• Insert the paper face down and adjust the paper guides to the paper size to avoid feed failure, skewing and paperjams.• Amount of loaded paper must not exceed the loading mark. If the loading mark is exceeded, this may cause feedfailure, skewing, and paper jams.• Adding paper during printing must be avoided because it may cause multi-feeds.• When removing the paper tray from the machine, always support it with both hands to avoid dropping it.• If you use paper already printed by your machine or another printer, the printing quality may not be optimal.Handling of paper• Curling must be corrected before printing.• Curls must not exceed 10 mm.• Care must be taken with storage to prevent feed faults and image defects due to leaving the paper in conditions ofhigh humidity.Humidity control• Paper which has become damp, or paper which has been left unused for a very long time, must not be used.• After opening the paper, it must be kept in a plastic bag.• Paper with waved ends, paper which is creased, paper with crumples, and any other non-normal paper must notbe used.Handling the machineOperator shocksDuring printing, avoid shocks due to static electricity applied to the paper tray, covers and other parts of the machine.Moving the machineWhen moving the machine on a desk, it must be lifted and not dragged.Handling the print cartridge• Must not be stood on the side, or held upside down.• Must not be shaken strongly.