USING PRINT MATERIALS3.163 When you print on card stocks or the custom-sized paper,you must select Manual Feed for Source from thesoftware application, and then select the correct paper sizeand type. For details, see page 4.6.Note: If the size of your print material is not listed in the Size boxin the Paper tab of the printer driver properties, click AddCustom button and set the size manually. See page 4.6.4 Press the button to start feeding.Printing is started. Close the rear output tray after theprinting is completed.Printing on Preprinted PaperPreprinted paper is paper that has some type of printing placedon it before it is sent through the printer (paper that has apreprinted logo at the top of the page, for example).Note: Please avoice using carbon paper because it may cause theprinter a mechanical trouble.Guidelines• Letterheads must be printed with heat-resistant ink that willnot melt, vaporize, or release hazardous emissions whensubjected to the printer’s fusing temperature of 400 °F(205 °C) for 0.1 second.• Ink on letterheads must be non-flammable and should notadversely affect any printer rollers.• Forms and letterheads should be sealed in a moisture-proofwrapping to prevent changes during storage.• Before you load preprinted paper as forms and letterheads,verify that the ink on the paper is dry. During the fusingprocess, wet ink can come off preprinted paper.
