Xerox Phaser 3160B User Manual

Also see for Phaser 3140: Features Specification Specifications Service manual Service manual

Contents

Xerox Phaser 3160B User Manual Manual pdf 52 page image

Troubleshooting_ 529.troubleshootingThis chapter gives helpful information for what to do if you encounter an error.This chapter includes:• Redistributing toner• Tips for avoiding paper curls• Tips for avoiding paper jams• Clearing paper jams• Solving other problemsREDISTRIBUTING TONERWhen the toner cartridge is near the end of its life:• White streaks or light printing occurs.• The LED blinks red.If this happens, you can temporarily improve print quality by redistributingthe remaining toner in the cartridge. In some cases, white streaks or lightprinting will still occur even after you have redistributed the toner.1. Open the front cover.2. Pull the toner cartridge out.3. Thoroughly roll the cartridge five or six times to distribute the tonerevenly inside the cartridge.If toner gets on your clothing, wipe it off with a dry cloth and washclothing in cold water. Hot water sets toner into fabric.Do not touch the green underside of the toner cartridge. Use thehandle on the cartridge to avoid touching this area.4. Hold the toner cartridge by the handle and slowly insert the cartridge intothe opening in the machine.Tabs on the sides of the cartridge and corresponding grooves within themachine will guide the cartridge into the correct position until it locks intoplace completely.5. Close the front cover. Ensure that the cover is securely closed.TIPS FOR AVOIDING PAPER CURLS1. Open the rear cover.2. Pull down the pressure lever on each side.Keep the rear cover opened during printing.Only use when the printout has more than 20 mm curl.1 Pressure lever