P RINTING T ASKS5.6Using Toner Save ModeToner Save mode allows the printer to use less toner on eachpage. Selecting this option will extend the life of your tonercartridge and reduce your cost per page, but will reduce printquality.There are two ways to enable the Toner Save mode.To enable this feature from your printerPress the button on the control panel. The printermust be in Ready mode (light is on).• If the button backlight is on, toner save mode activates andthe printer uses less toner to print a page.• If the button backlight is off, toner save mode is disabledand the printer prints in a normal mode.Note: To enable or disable the Toner Save mode from thecontrol panel, the Toner Save Mode option in the printer drivermust be set to Printer Setting. See below.To enable this feature from the software application1 When you change the print settings from your softwareapplication, access the printer properties. See page 5.1 toaccess the printer properties.2 Click the Graphic tab, and then select the Toner SaveMode option. You can select from:• Printer Setting: If you select this option, this feature isdetermined by the setting you’ve made on the controlpanel of the printer.• Standard: If you don’t need to save toner to print adocument, select this option.• Save: Select this option to allow the printer to use lesstoner on each page.3 Click OK.
