Installation and SetupXerox ® Phaser® 3610 Black and White Printer 37User GuideConfiguring Tray SettingsUse this menu to configure the paper trays for the paper size and type, set custom sizes, and turn thedisplay prompts on and off.To configure the tray settings:1. At your computer, open a Web browser, in the address field, type the IP address of the printer, thenpress Enter or Return.2. In CentreWare Internet Services, click Properties.3. To expand the menu, in the Properties pane, next to the General Setup folder, click the plus symbol(+).4. From the General Setup menu, click Tray Settings.5. To use the panel or print driver settings to select the Bypass Tray mode, under Tray Settings selectBypass Tray Mode.6. Under Tray Settings, next to each tray selection, select the paper size and paper type from the lists.7. Under Tray Settings, enter the custom paper sizes for the paper width (X) and the paper length (Y).8. To have the display prompt you for the paper settings each time the paper tray is loaded, next tothe corresponding tray, select On.9. Under Tray Priority, select the tray priority for paper usage.10. Click Save Changes.
