Paper and Media60 Xerox ® Phaser® 3610 Black and White PrinterUser Guide10. If the control panel prompts you, on the screen, verify the paper size and type.a. At the printer control panel, verify that the displayed paper size matches the paper in the tray.If correct, press OK.b. If the displayed paper size does not match the paper in the tray, navigate to the correct papersize, then press OK.Note: To navigate through the menu, use the Up or Down arrow buttons.c. Verify that the displayed paper type matches the paper in the tray. If correct, press OK.d. If the displayed paper type does not match the paper in the tray, navigate to the correct papertype, then press OK.11. Verify or set the paper size and type.a. At the printer control panel, press the Menu button.Note: To navigate through the menu, use the Up or Down arrow buttons.b. Navigate to Tray Settings, then press OK.c. Navigate to the desired paper tray, then press OK.d. Navigate to Tray Mode, then press OK.e. Navigate to Panel Specified, then press OK.f. To return to the previous menu, press the Left arrow button.g. Navigate to Paper Size, then press OK.h. To select a setting, press the Up or Down arrow buttons, then press OK.i. To return to the previous menu, press the Left arrow button.j. Navigate to Paper Type, then press OK.12. To select a setting, press the Up or Down arrow buttons, then press OK.Configuring Tray BehaviorWhen an individual tray is set to Display Popup mode, the control panel prompts you to verify or set thepaper size and type.The Tray Priority feature determines the order in which the printer selects the tray for a print job whenyou have not specified one. Tray Priority also determines how the printer selects another tray when apaper tray runs out in the middle of a job. Priority 1 indicates that the tray is set to the highest priority.Tray Mode allows you to have the bypass tray mode determined at the control panel or the print driver.To set the Display Popup mode:1. At the printer control panel, press the Menu button.Note: To navigate through the menu, use the Up or Down arrow buttons.2. Navigate to Tray Settings, then press OK.3. Navigate to the desired paper tray, then press OK.4. Navigate to Display Popup, then press OK.5. Navigate to On, then press OK.
