Xerox Phaser 4600DN User Manual

Also see for Phaser 4600: Quick use guide Supplementary guide Service manual Service manual Service manual

Contents

Xerox Phaser 4600DN User Manual Manual pdf 80 page image

SetupsXerox Phaser 4600/4620User Guide80SetupThe Setup options enable you to customize network settings, printer settings, general settings andmachine settings which are specific to the machine, such as Date & Time and Power Management.Network SettingsYou may set up the network using the machine's display screen. Before doing that, you must have therelevant information concerning the type of network protocols and computer system you use. If youare not sure which setting to use, contact your System Administrator or refer to the SystemAdministrator Guide for instructions.1. Press the Menu button on the control panel.2. Press the up/down arrows to highlight Tools and press OK.Note If a password is required, refer to Accessing Tools on page 78 for instructions.3. Press the up/down arrows to highlight Setup and press OK.4. Press the up/down arrows to highlight Network Settings and press OK.The following Network Settings options and settings are available:5. Press the up/down arrows to highlight the option required and press OK.6. Press the up/down arrows to highlight the setting required and press OK to save the selection.Option DescriptionTCP/IP v4TCP/IPv6Select appropriate protocol and configureparameters to use the network environment.Network Services Use to enable 802.1x and CentreWare InternetServices.Ethernet Speed Configure the network transmission speed.Network Ping Test Ping is a computer network administration utilityused to test whether a particular host is reachableacross an Internet Protocol (IP) network and tomeasure the round-trip time for packets sent fromthe local host to a destination computer, includingthe local host's own interfaces.AppleTalk Use to enable the machine to be setup on anAppleTalk network.NetWare Use to enable the machine to be setup on aNetWare network.Wireless Use to enable the machine to be configured on awireless network connection.Reset to Network Setup defaults Reverts the network settings to the default values.