Xerox Phaser 6125 User Manual

Also see for Phaser 6125: Quick use guide User guide Quick use guide Instruction sheet Instruction sheet

Contents

Xerox Phaser 6125 User Manual Manual pdf 10 page image

User SafetyPhaser® 6125 Color Laser Printer1-4Operational SafetyYour printer and supplies were designed and tested to meet strict safety requirements. Theseinclude safety agency examination, approval, and compliance with established environmentalstandards.Your attention to the following safety guidelines helps to ensure the continued, safeoperation of your printer.Printer LocationPlace the printer in a dust-free area within a temperature range of 50° F to 90° F (10° C to32° C) and a relative humidity range of 15 percent to 85 percent.Humidity should be 70 percent or below at 90° F, and temperature should be 82° F or below at85 percent humidity.Note: Sudden temperature fluctuations can affect print quality. Rapid heating of a cold roomcan cause condensation inside the machine, directly interfering with image transfer.Printer ClearancePlace the printer in an area where there is adequate space for ventilation, operation, andservicing. The recommended minimal spacing is:Overhead Clearance:■ 20 cm (7.9 in.) above the printerTotal Height Requirements:■ Printer: 58.9 cm (23.2 in.)Other Clearances:■ 10 cm (3.9 in.) behind the printer■ 60 cm (23.6 in.) in front of the printer■ 10 cm (3.9 in.) on the left side of the printer■ 25 cm (9.8 in.) on the right side of the printerOperational Guidelines■ Do not block or cover the slots and openings on the printer. The printer may overheatwithout adequate ventilation.■ For optimum performance, use the printer at elevations below 3,500 m (11,480 ft.).■ Do not place the printer near a heat source.■ Do not place the printer in direct sunlight to avoid exposing light-sensitive componentswhen the doors are open.■ Do not place the printer in line with the cold air flow from an air conditioning system.Downloaded From ManualsPrinter.com Manuals