Print-Quality ProblemsPhaser® 6125 Color Laser Printer6-2Print-Quality ProblemsWhen the print quality is poor, select the closest symptom from the following table to correctthe problem.If the print quality does not improve after carrying out the appropriate action, contact XeroxCustomer Support or your reseller.Symptom Reason/ActionFaded printouts Multiple colors faded:■ The toner cartridges are not Xerox toner cartridges.Verify that the toner cartridges (C/M/Y/K) meet specifications, andreplace if necessary.■ The paper is outside the recommended specification range.Replace the media with a recommended size and type, and confirmthat your control panel settings are correct. See About Paper onpage 4-5.■ The paper is damp.Replace the paper. See About Paper on page 4-5.■ The transfer unit is old or damaged.Replace the transfer unit.■ The high-voltage supply is defective.See the Xerox Support website, www.xerox.com/office/6125support,for assistance.You can continue printing in black and white if the color toner cartridgesrun out. In the print driver, select Black and White in the Output Colorfield to continue printing without color.Only one color faded:■ Try toner refresh of the faded toner.■ Check the condition of the toner cartridge, and replace as necessary.Downloaded From ManualsPrinter.com Manuals
