Xerox Phaser 6300 Advanced Features Manual

Also see for Phaser 6300: Supplementary guide Instruction sheet Repacking guide Administrator's guide Administrator's guide

Contents

Xerox Phaser 6300 Advanced Features Manual Manual pdf 69 page image

Printer SettingsPhaser® 6300/6350 Color Laser Printer5-7Changing Intelligent Ready ModeIntelligent Ready mode is an automated system that:■ Monitors the printer’s usage.■ Warms up the printer when you are most likely to need it based on past usage patterns.■ Activates the Power Saver mode when the printer times out.To turn on/off the Intelligent Ready mode, use one of the following options:■ The printer’s control panel■ CentreWare ISUsing the Control PanelTo turn Intelligent Ready mode on/off on the control panel:1. Select Printer Setup, and then press the OK button.2. Select Printer Controls, and then press the OK button.3. Select Intelligent Ready.4. Press the OK button to turn on/off Intelligent Ready.5. Select Exit, and then press the OK button to return to the main menu.Using CentreWare ISTo select Intelligent Ready mode or to schedule warmup/standby settings usingCentreWare IS:1. Launch your web browser.2. Enter your printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).3. Click Properties.4. Select the General folder on the left sidebar, and then select Warmup.5. Select Intelligent Ready, Scheduled, or Job Activated from the Warmup Modedrop-down list to change the setting.6. If you selected Scheduled in Step 5, make selections for each day’s warmup setting andstandby setting.7. Click the Save Changes button at the bottom of the screen.Note: Although the control panel selections only enable you to turn Intelligent Ready modeon or off, CentreWare IS enables you to specify particular printer Warmup modes and settings.