Xerox Phaser 6300 Advanced Features Manual

Also see for Phaser 6300: Supplementary guide Instruction sheet Repacking guide Administrator's guide Administrator's guide

Contents

Xerox Phaser 6300 Advanced Features Manual Manual pdf 70 page image

Printer SettingsPhaser® 6300/6350 Color Laser Printer5-8Changing the Load Paper TimeoutWhen your print job is formatted for a type or size of paper that is not loaded in the printer, theprinter’s control panel displays a message requesting you to load the appropriate paper. TheLoad Paper Timeout value controls the amount of time the printer waits before printing onanother type or size of paper.To change the Load Paper Timeout value, use one of the following options:■ The printer’s control panel■ CentreWare ISUsing the Control PanelTo change the Load Paper Timeout value on the control panel:1. Select Paper Tray Setup, and then press the OK button.2. Select Paper Handling Setup, and then press the OK button.3. Select Load Paper Timeout, and then press the OK button.4. Scroll to the desired timeout value. The values (None, 1, 3, 5, or 10 minutes, 1 hour or24 hours) indicate the length of time you want the printer to wait for you to load paperbefore printing. If you select a value of None, the printer does not wait for paper to beinserted and immediately picks paper from the default tray.5. Press the OK button to save the change.Using CentreWare ISTo change the Load Paper Timeout value using CentreWare IS:1. Launch your web browser.2. Enter your printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).3. Click Properties.4. Select the General folder on the left sidebar, and then select Printer Defaults.5. Scroll to the desired Load Paper Timeout value in Timeout Settings. The values (None,1, 3, 5, or 10 minutes, 1 or 24 hours) indicate the length of time you want the printer towait for you to load paper before printing. If you select a value of None, the printer doesnot wait for paper to be inserted and immediately picks paper from the default tray.6. Click the Save Changes button at the bottom of the screen.