Installation and SetupPhaser 6500 Color Laser PrinterUser Guide29Selecting a Location for the Printer1. Select a dust-free area with temperatures from 10° through 32°C (50°–90°F), and relative humidityfrom 15 through 85%.Note: Sudden temperature fluctuations can affect print quality. Rapid heating of a cold room cancause condensation inside the printer, directly interfering with image transfer.2. Place the printer on a level, solid, non-vibrating surface with adequate strength for the weight ofthe printer. The printer must be horizontal with all four feet in solid contact with the surface. Theprinter weight, without the options or paper, is 19.8 Kg (43.6 lb.). With the 250-sheet feeder, theduplex unit, and supplies, the weight is 24.2 Kg (53.2 lb.).3. Ensure that your printer has the proper amount of clearance for all of its features, including anyoptions you purchased. See the following measurements.The recommended minimal spacing for the printer includes the following:4. After positioning the printer, you are ready to connect it to the power source and computer ornetwork. Go to the next section, Connecting the Printer on page 30.Requirement ClearanceOverhead Clearance 200 mm (7.9 in.) above the printer for clearance when opening the frontdoorHeight Requirement Printer: 416.1 mm (16.4 in.)Printer with 250-sheet feeder: 523 mm (20.6 in.)Other Clearances 100 mm (3.9 in.) behind the printer600 mm (23.6 in.) in front of the printer100 mm (3.9 in.) on the left side of the printer250 mm (9.8 in.) on the right side of the printerDownloaded From ManualsPrinter.com Manuals
