Administrator ToolsPhaser 7100 Color PrinterSystem Administrator Guide84CloningNote: Install the Productivity Kit to use this feature.This feature allows you to save your printer settings in a clone file. You can use the clone file to copyyour printer settings to another printer, or use it to back up and restore settings on your own printer.Note: If you are using the clone file to copy your printer settings to another printer, both printersmust be the same model, and must have the same version of software.To determine the software version of your printer:1. In CentreWare Internet Services, click Properties > General Setup > Configuration Report.2. Scroll down to Software Versions.Saving Your Printer Settings to a Clone File1. In CentreWare Internet Services, click Properties > General Setup > Cloning.2. Under Create Clone File, select the feature settings that you want to save.All features are selected by default.3. To view the specific parameters that can be cloned for any of the features, click View FeatureDetails.4. Click Clone.The Cloning page is displayed.5. On the Cloning page, under Create Clone File, right-click Cloning.dat and save it to your computer.Note: The default name for the file is Cloning.dat. If you rename the file, use .dat as the fileextension.Installing a Clone FileNote: This procedure will restart the printer and will be unavailable over the network for severalminutes.1. In CentreWare Internet Services, click Properties > General Setup > Cloning.2. Under Install Clone File, click Browse and navigate to your clone file.3. Click Install.
