Xerox Phaser 7700 Advanced Features And Troubleshooting Manual

Also see for 7700: User guide User guide Supplementary guide Install guide Setup and quick reference guide

Contents

Xerox Phaser 7700 Advanced Features And Troubleshooting Manual Manual pdf 48 page image

42 Phaser 7700 Color PrinterPrinter Utilities For NetWare 3.xx and NetWare 4.xx bindery queues:capture q=[queue_name] l=[port] nb nff ntwhere queue_name is the name of the queue to be captured, and port is the virtualport to capture to, such as LPT3.Also, nb is no banners, nff is no form feeds, and nt is no tabs.For example: capture q=phaser_7700 l=3 nb nff ntNoteFor NetWare 4.xx NDS queues, the queue name needs to start with a period.For example:capture q=.phaser_860_q.nds.printers.support l=2 nb nff ntFor Windows 95 / 98 environments:1. From the Details tab of your printer’s driver, select the Capture Printer Port button.2. In the Capture Printer Port dialog box: For bindery queues, enter the path as \\server_name\queue_nameFor example: \\nw_server\Phaser_7700 For NDS queues, enter the path as \\Tree\queue_name.contextFor example: \\Tek\.Phaser_7700_Q.nds.printers3. Click the OK button.NoteIf the appropriate file server is not listed, click the Attach button and select thedesired file server. Login and click the OK button. Within the Operation section,check the box next to Permanent, then click Connect. The port should then becaptured.Downloading files if your printer is connected to Windows NTUse this procedure to redirect (capture) LPT Ports.Under Windows NT print spooler, you create Ports based on their physical location: Local ports = Lpt1 / Lpt2, etc. IPX Port = \\NW_SERVER\Phaser AppleTalk Ports = WV Net 36:Phaser TCP/IP Ports = 162.36.62.151:PS or [AUTO]However, if you’re at a command prompt (DOS Prompt) and want to print, or copy, aPostScript file to a port that is a network port, you can do the following: TCP/IP Ports:lpr -S [printers IP Address] -P [print queue] filenameFor example: lpr -S 134.62.36.70 -P PS test.ps