Setting Up the NetworkPhaser® 8560MFP/8860MFP Multifunction Printer2-3Setting Up the NetworkThis section includes:■ Choosing a Connection Method on page 2-3■ Connecting via USB on page 2-3■ Connecting via Ethernet (Recommended) on page 2-3Choosing a Connection MethodConnect the product via Ethernet or USB. A USB connection is a direct connection and notused for networking. An Ethernet connection is used for networking. Hardware and cablingrequirements vary for the different connection methods. Cabling and hardware are generallynot included with your product and must be purchased separately.Connecting via USBIf you are connecting to one computer, a USB connection offers fast data speeds. However, aUSB connection is not as fast as an Ethernet connection. To use USB, PC users must haveMicrosoft Windows 2000, Windows XP, Windows Server 2003, or a newer operating system.Macintosh users must use Mac OS X, version 10.3 and higher.USB ConnectionA USB connection requires a standard A/B USB cable. This cable is not included with yourproduct and must be purchased separately. Verify that you are using the correct USB cable foryour connection.1. Connect one end of the USB cable to the product and turn it on.2. Connect the other end of the USB cable to the computer.See also:Installing the Printer Drivers on page 2-10Connecting via Ethernet (Recommended)Ethernet can be used for one or more computers. It supports many printers and products on anEthernet network. An Ethernet connection is recommended because it is faster than a USBconnection. It also allows you direct access to CentreWare Internet Services (IS).CentreWare IS provides a simple interface that enables you to manage, configure, and monitornetworked printers from your desktop using an embedded web server. For completeinformation about CentreWare IS, click the Help button in CentreWare IS to go to theCentreWare IS Online Help.
