Xerox Versant 3100 Press User Manual

Also see for Versant 3100 Press: Security guide

ProblemTrail Edge DeletionsSuggested SolutionsChange the Transfer Output Adjustment for Trail Edge setting.• This feature is used to adjust the voltage ratio on the Secondary Bias Transfer Roll (BTR),where the image is transferred from the belt to the paper.• This feature can be found in Stock Library Manager > Stock Properties > Advanced Setup >Transfer Output Adjustment for Trail Edge.• Decrease the Transfer Output Adjustment for Trail Edge in increments of 5 to 10%. Afterevery increment adjustment run test prints and evaluate the output to determine if addi-tional adjustment is necessary.Stock Library Manager Default SettingsThe information provides the default values, ranges, and recommended incrementaladjustments for the various Stock Library Manager features, options, and settings.Alignment ProfileRecommendedIncremental Ad-justmentAvailable RangeAdjustment StepIncrementsDefault ValueOption / SettingRegistrationDetermined bytest print output-2.0 to 2.0 mm0.10.0Side 1, SideDetermined bytest print output-2.0 to 2.0 mm0.10.0Side 1, LeadDetermined bytest print output-2.0 to 2.0 mm0.10.0Side 2, SideDetermined bytest print output-2.0 to 2.0 mm0.10.0Side 2, LeadPerpendicularityDetermined bytest print output-1.0 to 1.0 mm0.10.0Side 1Determined bytest print output-1.0 to 1.0 mm0.10.0Side 2SkewXerox® Versant® 3100 Press7-22User GuideTroubleshooting