Xerox Wide Format 510DP Operator's Manual

Also see for DocuMate 510: User guide Setup guide User guide Release note Release note

MEDIA12 XEROX WIDE FORMAT 510dp OPERATOR MANUAL11. Squeeze the lever at the end of the media roll support tubeand position the tube until the size indicators on the tubematch the size of the roll.• For example, if the media roll is 36 inches, the ends of themedia roll should be at the 36-inch markers on the mediaroll support tube.12. Place the new media roll into the media drawer so that thelead edge of the paper is on the underside of the roll andtoward the printer.13. Position the media roll support tube so that the ends of thetube rest within the support rollers at the sides of the drawer.• Ensure that the tube falls into place within the supportrollers.14. Remove the tape from the lead edge of the media roll.15. If the lead edge of the media roll contains debris from theadhesive or is torn or uneven, trim the lead edge.NOTE: Trimming is not usually necessary for a new roll ofmedia.