Xerox Wide Format 510DP Operator's Manual

Also see for DocuMate 510: User guide Setup guide User guide Release note Release note

OFF-LINE SETUP MENUXEROX WIDE FORMAT 510dp OPERATOR MANUAL 23Setting the timersTo set the Power Saver mode and Rest mode timers:1. Access the PRINTER MENU. See "Accessing the PrinterMenu" in this chapter.2. Press the Previous or Next key until TIMERS is displayed.3. Press the Enter key to select TIMERS. The current setting forthe READY TO POWER SAVER option is displayed.4. Do one of the following:• To select the READY TO POWER SAVER option, pressthe Enter key.• To select the POWER SAVER TO REST option:- Navigate to it by pressing the Previous or Next key.- Press the Enter key to select the option.5. Press the Previous or Next key to scroll through the range ofvalues.6. When you scroll to the desired value, press the Enter key tosave your selection.7. Press the On-line/Off-line key to return to on-line mode.• The on-line/off-line indicator will light.• The display will indicate " SYNERGIX CS 510dp IDLE "or"SYNERGIX PS 510dp".Adjusting the print densityNote: If there is a Scanner connected, the message displayed willbe SYNERGIX CS 510dp. If there is no Scanner connected themessage will be SYNERGIX PS 510dp.To adjust the print density:1. Access the PRINTER MENU. See "Accessing the PrinterMenu" in this chapter.2. Press the Previous or Next key until PRINTERADJUSTMENTS is displayed.3. Press the Enter key to select PRINTER ADJUSTMENTS. Thecurrent setting for the DENSITY option is displayed.4. Press the Enter key to select DENSITY.5. Press the Previous or Next key to scroll through the range ofvalues.6. When you scroll to the desired value, press the Enter key tosave your selection.7. Press the On-line/Off-line key to return to on-line mode.• The on-line/off-line indicator will light.• The display will indicate " SYNERGIX CS 510dp IDLE" or"SYNERGIX PS 510dp"