2 Print Feature and CentreWare Internet Services2.2 Machine Settings622.2 Machine SettingsThe following describes how to configure the settings at the machine user interface.Note CentreWare Internet Services can also be used to make these settings. For details, refer to the Help section whichcan be displayed by clicking [Help] in the upper right of the CentreWare Internet Services screen.Steps1. On the [System Administrator Menu] screen, press [System Settings] > [Network Settings].Note For information on how to display the [System Administrator Menu] screen, refer to "SystemAdministrator Menu Settings Overview" (p. 104).2. Check that [LPD] is set to [Enabled] for [Port Settings].Refer For information on the LPD port setting, refer to "5.5.1 Port Settings" (p. 119).3. Press [Close] to return to the [Network Settings] screen.Note When the machine is already assigned an IP address, go to Step 7.4. Press [Protocol Settings] > [IPv4 - IP Address]5. Specify the IP address using the numeric keypad.6. Press [Save].7. Press [Close] several times until the [System Administrator Menu] screen is displayed.8. Press [Close].Note When a message prompting you to reboot the machine appears, follow the message to reboot themachine.
