Xerox WorkCentre 4118 System Administration Manual

Also see for 4118P - WorkCentre B/W Laser: Installation guide Quick start card Brochure & specs Quick reference guide Quick guide

Contents

Xerox WorkCentre 4118 System Administration Manual Manual pdf 40 page image

Page 4-10 Xerox WorkCentre 4118 System Administration GuidePrint Driver Installation for Networked Printers Windows 2000 (Internet Printing Protocol)NOTE: Windows 2000 supports printing via IPP as standard when TCP/IP isinstalled on a Windows 2000 Workstation.Use the Add Printer Wizard to add the WorkCentre 4118 to the network.¾ Select [Start], select [Settings], and then select [Printers].Double-click on the [Add Printer] icon to display the Add Printer Wizard.¾ Verify that the [Network Printer] is selected and click [Next].The [Locate Your Printer] screen displays.¾ Select [Connect to a printer on the Internet or on your intranet].In the [URL] field enter the IP Address or hostname of the printer in the following format:http://aaa.bbb.ccc.ddd or http://printer-host-name, where aaa.bbb.ccc.ddd is the IPaddress of the WorkCentre 4118 and printer-host-name is the host name of theWorkCentre 4118 registered with a DNS server.The Add Printer Wizard will then ask if you wish to install a local driver for this printer. Youshould click [OK] to install the driver.¾ Insert the CD containing the WorkCentre 4118 drivers and select [Have Disk].Browse to the required Windows 2000 driver on the CD and select [OK].NOTE: The driver will be found in the Drivers>Print folder on the CD in theappropriate PCL or PostScript (PS) folder. For PostScript, you will need to choosethe required language. The driver is identified by the file extension .inf.Select [Next], and select [Next] again and the WorkCentre 4118 driver will be loaded ontothe workstation.A dialog box displays with a message regarding the printing of a test page.Select [Finish] to accept the Yes choice.¾ Continue with Test Print on page 4-14.12345