3-12 Sending a FaxMemory Transmission (Broadcasting)With Memory Transmission (Memory TX), documents are stored inmemory and automatically sent to one or more remote stations. Use thisfeature to send your documents to multiple locations.You can store a maximum of ten fax numbers for a memory transmission. Ifyou need to send your fax to more than ten locations, you can increase thenumber of fax locations dialed by including a Group Dial number as one ofthe ten numbers.After sending, the documents are automatically erased from memory.1 Adjust the document guides to match the width of the document.2 Slide the document face down into the Automatic Document Feederuntil it is grasped and pulled into the machine.If necessary, adjust the resolution and contrast. For details, seeResolution on page 3-25 and Contrast on page 3-27.3 Press the Menu button, then press 0 + 7 buttons on the keypad.Then press the Start button.4 Enter the telephone number of the remote machine. There are twomethods available to do this:• Direct entry of the telephone number using the numeric keypad.• Speed Number dialing using the numeric keypad (see SpeedDialing on page 3-19).
