Installation and SetupInstallation and Setup OverviewBefore you print, ensure that your computer and the printer are plugged in, turned on, and connected.Configure the initial settings of the printer, then install the print driver software and utilities on yourcomputer.You can connect to your printer directly from your computer using USB, or connect over a network usingan Ethernet cable or wireless connection. Hardware and cabling requirements vary for the differentconnection methods. Routers, network switches, modems, Ethernet cables, and USB cables are notincluded with your printer and must be purchased separately. Xerox recommends an Ethernet connectionbecause it is typically faster than a USB connection, and it provides access to the Embedded Web Server.Note: If the Software and Documentation disc is not available, you can download the latest printdrivers from www.xerox.com/office/WC6515drivers.For reference:Selecting a Location for the Printer on page 39Selecting a Connection Method on page 40Connecting the Printer on page 40Configuring Network Settings on page 54Installing the Software on page 6038 Xerox® WorkCentre ® 6515 Color Multifunction PrinterUser Guide
