Installation and SetupInstalling the Drivers and Utilities for Macintosh OS X1. Insert the Software and Documentation disc into the appropriate drive on your computer.2. Open Xerox ® Print Drivers 3.xx.x.dmg/.pkg as needed for your printer.3. To run Xerox ® Print Drivers 3.xx.x.dmg/.pkg, double-click the appropriate file name.4. When prompted, click Continue.5. To accept the license agreement, click I Agree.6. To accept the current installation location, click Install, or select another location for the installationfiles, then click Install.7. If prompted, enter your password, then click OK.8. From the list of discovered printers, select your printer, then click Next.9. If your printer does not appear in the list of discovered printers:a. Click the Network Printer Icon.b. Type the IP address of your printer, then click Continue.c. Select your printer in the list of discovered printers, then click Continue.10. If your printer was not detected, verify that the printer is on and that the Ethernet or USB cable isconnected properly.11. To accept the print queue message, click OK.12. Select or clear the Set Printer as Default and Print a Test Page check boxes.13. Click Continue, then click Close.62 Xerox® WorkCentre ® 6515 Color Multifunction PrinterUser Guide