Xerox WorkCentre Pro 90 Quick Reference Manual

Also see for CopyCentre C65: Quick start guide User guide User manual

Contents

Xerox WorkCentre Pro 90 Quick Reference Manual Manual pdf 17 page image

XEROX C OPY C ENTRE C65/C75/C90 W ORK C ENTRE PRO 65/75/90 Q UICK R EFERENCE G UIDE P AGE 1-9WELCOMESAFETY...IntroductionYour Xerox product and supplies have been designed and tested to meet strictsafety requirements. These include safety agency approval and compliance toestablished environmental standards. Please read the following instructionscarefully before operating the product and refer to them as needed to ensure thecontinued safe operation of your product.The safety testing and performance of this product have been verified usingXerox materials only.Follow all warnings and instructions marked on, or supplied with the product.This WARNING Mark alerts users to the possibility of personal injury.This WARNING Mark alerts users to heated surfaces.Safety NotesWARNING: This product must be connected to a protective earthing circuit.This product is equipped with a 3-wire type plug, provided with a protectiveearthing pin. This plug will fit only into an earthed power outlet. This is a safetyfeature. To avoid risk of electric shock, contact your electrician to replace thereceptacle if you are unable to insert the plug into the outlet. Never use an earthedadapter plug to connect the product to a power source receptacle that lacks an earthconnection terminal.This product should be operated from the type of power source indicated on themarking label. If you are not sure of the type of power available, consult your localpower company.Disconnect Device for this product is the power cord. To remove all electricalpower to the product, disconnect the power cord from the power receptacle.Do not put your hands into the fuser area, located just inside the exit tray area, asyou may be burned.Do not use pressurized air-spray cleaning aids on or in this equipment. Somepressurized air-spray containers contain explosive mixtures and are not suitable foruse in electrical applications. Use of such cleaners can result in a risk of explosionand fire.