Xerox WorkCentre XE80 User Manual

Contents

Xerox WorkCentre XE80 User Manual Manual pdf 45 page image

36Creating WorkCentre XE Floppy Disk InstallationDiskettesIf floppy diskettes are required to install the WorkCentre Printer DriverSoftware, the user can order floppy diskettes or create a set of diskettesfrom CD-ROM.To create a set of WorkCentre XE Printer Driver floppy Diskettes, find a PCthat has a floppy diskette drive with a CD-ROM drive and follow theprocedure below. Four or five blank high density diskettes will be required.Windows 3.1x:1. Insert the WorkCentre CD-ROM into the CD-ROM Drive.2. Choose File from the menu bar in Program Manager, and thenchoose the Run… command.3. Type D:\MAKEDISK\MAKEDISK.EXE (or the appropriate drive letterdepending on your CD-ROM Drive) in the command line box. Clickon the OK button to proceed.4. Follow the on-screen instructions.Windows 95, Windows 98 and Windows NT 4.0:1. Insert the WorkCentre CD into the CD-ROM Drive.2. Click on the Start button and then choose the Run menu option.3. Type D:\MAKEDISK\MAKEDISK.EXE (or the appropriate drive letterdepending on your CD-ROM Drive) in the command line box. Clickon the OK button to proceed.4. Follow the on-screen instructions.To use the Floppy Disk Installation Disks created, follow the sameprocedure for your operating system but refer to the floppy disk drive (A: B:)rather than the CD-ROM drive (D:).