Xerox WorkCentre XE80 User Manual

Contents

Xerox WorkCentre XE80 User Manual Manual pdf 48 page image

39Repacking the WorkCentreStorage/TransportationWhen you pack the WorkCentre away for storage or transportation, followthe instructions given below to ensure that the WorkCentre will not getdamaged. Use the original box and packing materials.1. Turn off the power switch and disconnect the power cord.2. Open the front door.Be careful not to let any toner spill out of the toner cartridgeduring removal.3. Remove the toner cartridge. (Refer to Replacing the Toner Cartridge.)4. Close the front door.5. Insert the shipping screw stored in the plastic insert in the right handside of the front door.6. Push in the paper tray extension (if in use), remove any paper from thetray and remove the tray.7. Store the IEEE-1284 parallel cable and the power cord.ServiceIt is important that you speak with a service representative to resolve anypersistent problem. The service representative will direct you as to whataction must be taken.The WorkCentre cannot be shipped for service without the authorization ofa service representative.Visit the Xerox Web site at: http://www.teamxrx.comor call our experts at:1 – 800 – TEAM – XRX (1 – 800 – 832 – 6979)