Xerox XC811 Manual

Xerox XC811 Manual Manual pdf 17 page image

9Power Reduction / Auto ClearPower Reduction Modes automatically reduce power consumed by thecopier when the copier has not been used for a set period of time. Thereare two modes.1. Power Save Mode – In this mode, the fuser is maintained at a lowerheat level, thereby saving power. The Ready Indicator will flash andthe other indicators will remain on. To copy from the Power Savemode select the desired features and press Start. The copies will bemade automatically.2. Power Shut-off Mode – This mode saves more power than the PowerSave Mode, but requires more time before copying can restart. Whenthe copier enters the power shut-off mode the Ready Indicator willflash and the other indicators will turn off. To copy from the PowerShut-off mode, press Start, select the desired features and press Startagain. The copies will be made automatically.Auto Clear – The copier returns to normal copy mode approximately oneminute after a job is completed. Unless otherwise programmed, thenormal copy mode settings are as follows:• Copy Quality – Auto• Copy lighter/darker – Normal• Priority Tray – Tray 1• Priority Magnification – 100%• Quality Selected – 1Note: The time periods for the Power Shut-off, Power Save, and AutoClear modes can be modified to meet your specific copying needs. Referto Customising Your Copier section of this User Guide for informationabout changing these settings.