Xerox XC811 Manual

Xerox XC811 Manual Manual pdf 5 page image

iiiSafety NotesYour copier and supplies have been designed and tested to meet strictsafety requirements. These include safety agency examination andapproval, and compliance to established environmental standards. Pleaseread the following instructions carefully before operating your copier andrefer to them as needed to ensure the continued safe operation of yourcopier.• FOLLOW all warnings and instructions marked on or supplied with theproduct.• SYMBOLOGY: = High Voltage, = Heated Surface.• UNPLUG this copier from the wall outlet before cleaning. Always usematerials specifically designated for this copier. Use of other materialsmay result in poor performance and could create a hazardous situation.• DO NOT use aerosol cleaners. Follow the instructions in this UserGuide for proper cleaning methods.• NEVER use supplies or cleaning materials for purposes other thanwhat they were intended. Keep all supplies and materials out of reachof children.• DO NOT use this copier near water, wet locations, or outdoors.• DO NOT place this copier on an unstable cart, stand, or table. Thecopier may fall, causing personal injury or serious damage to thecopier.• YOUR COPIER is equipped with a 3-wire grounding-type plug (i.e., aplug having a third grounding pin). This plug will only fit into agrounding-type power outlet. This is a safety feature. To avoid risk ofelectric shock, contact your electrician to replace the receptacle if youare unable to insert the plug into the outlet. Never use a groundadapter plug to connect the copier to a power source receptacle thatlacks a ground connection terminal.• YOUR COPIER should be operated from the type of power sourceindicated on the marking label. If you are not sure of the type of poweravailable, consult your local power company.Required by IEC-950 (EN 60 950) Europe:The equipment should be installed near an accessible socket outletfor easy disconnection.